How do I replace the 2D strap temple assembly (including the DP cable) on the Dream Air?
Print
Modified on: Tue, 3 Nov, 2026 at 4:31 PM
A: Please refer to the video tutorial:
Removing the Old Cable:
Disconnect all cables: unplug the DP connector from the PC graphics card, as well as the USB plug and power plug, to ensure the headset is fully powered off.
Remove the magnetic face gasket from the headset.
Separate the headset from the strap: place the headset face-down on a soft surface (such as a microfiber cloth). Locate the clip system where the strap connects to the left and right temples, gently press the clips, and separate the strap from the temples.
Remove the left temple: hold the headset body firmly with one hand, and with the other hand grip the inner clip at the end of the left temple. Keeping it perpendicular to the side of the headset, gently pull outward until the temple is completely separated from the headset.
Remove the right temple using the same method as the left temple.
Installing the New Cable:
Connect the left temple to the headset: align the USB-C plug at the front end of the left temple with the port on the left side of the headset, and gently push inward perpendicular to the side of the headset until you hear a "click", indicating a secure connection.
Connect the right temple to the headset: connect the right temple using the same method as the left temple.
Install the headset face gasket.
Install the headset strap: align both ends of the strap with the clips on the left and right temples, and gently push inward until you hear a "click", indicating the strap is securely installed.
Did you find it helpful?
Yes
No
Send feedback Sorry we couldn't be helpful. Help us improve this article with your feedback.